6. Multi-detail and detail assembly drawings. Multi-detail and detail assembly drawings may be used at
the discretion of the contractor. The mono-detail drawing system shall not be mandatory for SIE
drawing/models packages.
7. CAGE Code and document numbers. SIE Drawings/Models and Associated Lists will be
identified with the contractor's CAGE Code and contractor document numbers or with a
Government CAGE Code and Government document numbers as specified in the Option
Selection Worksheet incorporated in the contract.
8. Control drawings. Vendor items used in the SIE, without alteration, selection, or source qualification, shall be identified on SIE Drawings and Associated Lists by the vendor's CAGE Code and item identification. Vendor Item Control Drawings are not required for vendor items. When vendor items must be altered, selected, or require source qualification prior to use in the SIE, they shall be documented on Altered Item, Selected Item, or Source Control Drawings in accordance with ASME Y14.24.
Defines standard
Replaced/Superseded by document(s)
Cancelled by
Amended by
Provides definitions
Cover images
Introduction
Special Inspection Equipment (SIE) Drawings/Models and Associated Lists
provide the data required for the limited production of SIE which duplicates the physical and
performance characteristics of the original SIE.